Ivoclar vivadent Programat CS4 Furnace

Description

Ivoclar vivadent Programat CS4 Furnace

Ivoclar vivadent Programat CS4 Furnace is capable of speed sintering zirconia and lithium disilicate materials. Based on the long-standing success and high-quality of other Ivoclar Vivadent firing and press furnaces that have been used by dental professionals for decades, the Programat CS4 features 30 programs, 8 pre-installed programs that are optimized for Ivoclar Vivadent materials, and 22 open programs that are free and available for individual, customized programming.

Features

The firing chamber can be heated up to 1600 ° C;
The electronics with the corresponding software controls the sintering program;
There is a constant comparison between the actual and the set temperature;
The sintering table can accommodate up to 6 single restorations at the same time

Advantages

Fast sintering of IPS e.max ZirCAD
Crystallization of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software

Application

Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
Crystallization and glazing (e.g. IPS e.max CAD).
The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.

Specifications

Power supply: 118-240 V / 50-60 Hz
Overvoltage category: II
Pollution degree: 2
Allowable voltage fluctuations: + – 10%
Maximum current consumption: 16A @ 118V, 8A @ 240V
Electrical fuses: 250 V / T 16 A (heating element)
Fuse size: diameter 5 x 20 mm
Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
Useful chamber volume: diameter – 80 mm, height – 80 mm
Maximum firing temperature: 1600 ° C
Weight: bottom 10 kg, furnace head 17 kg

Includes

Basic Furnace
Sinter Tray
Sinter Tray Fork
IPS e.max CAD Speed Crystalization Tray
Temperature Checking Set Starter Kit
Power Cord
Warranty Card
Instructions for Use